Digital
User Guide
Royal Oak Caliber 8100
Welcome
Welcome to the user manual for the Royal Oak - Caliber 8100. This User Guide will walk you through the steps to setup and maintain your Audemars Piguet.
1. Hour hand
Indicates the current hour.
2. Minute hand
Shows the current minutes.
3. Chronograph hand
Measures elapsed time in seconds.
4. 30-minute counter
Tracks elapsed minutes in a chronograph function.
5. 12-hour counter
Tracks elapsed time in hours, up to 12 hours, when the chronograph is running.
6. Top pusher button
Start and stops the chronograph
7. Bottom pusher button
Flyback and reset function of the chronograph.
8. Crown position indicator
Displayed are all the possible positions of the crown.
Winding
Before starting, make sure your watch is fully wound. To wind your watch, remain in position A and rotate the crown clockwise approximately 25 times.
Enter the current time
To ensure the following information is accurate, please indicate here the time that your watch is currently set at.
Push the top of the crown
Press the small button on top of the crown once to pop it out slightly to position B. This unlocks the crown for setting the time.
Set the time
If the prevailing time is before noon, rotate the crown anti-clockwise, however, if the prevailing time is after noon, then rotate the crown clockwise.
Secure the top of the crown
Press the button again to secure the small button back in position A.
Start the chronograph
Press pushpiece 1 to start the chronograph.
Stop the chronograph
Press pushpiece 1 to stop the chronograph.
Restart the chronograph
Press pushpiece 1 to restart the chronograph.
Return to zero
Press pushpiece 1 to stop the chronograph, then pushpiece 2 for zero reset.
Completed
Congratulations! Your watch is now set.